DME11Pressure Transmitter for standard applications

Features

output signal 0–20 mA, 3-wire, 4-20 mA, 2-wire or 0-10V DC, 3-wire
pressure-measuring ranges from 0-1 or -1-0 to 0-400 bar
for standard applications, e.g. in the energy field

Description

The Type DME 11 pressure transmitter with ceramic membrane is a cost-efficient pressure transmitter for standard applications, for example in the energy field. The measuring pressure acts directly on a ceramic membrane that deforms when pressure is applied. The electronic system integrated into the pressure transmitter housing converts the signal generated by the DMS connector on the ceramic membrane into a standard electrical output signal 0…20 mA, 4…20mA or 0…10V DC

_______________________________________________________________________________________________________

DMU100 Pressure transducer integrated into a tube spring mamometer

Features

output signal 0-20 mA, 3-wire or 4-20 mA, 2-wire
pressure-measuring ranges from 0-1 or -1-0 to 0-1000 bar
electrical output signal is independent of the manometer indication
options:
- limit signal indicator
- diaphragm seal
- housing filling

Description

The pressure transducer with its tube spring measuring system is a mechanical pressure meter with a local display and an integrated piezo-resistive sensor for remote transmission of pressure values in the form of a constant analog signal at 0 or 4-20 mA.
The design is such that the electrical output signal is independent of the manometer indicator. A defective manometer will therefore not affect the electrical output signal and vice versa.
The vibration-resistant mechanical construction and high-grade electronic equipment render this pressure transducer suitable for operation under difficult conditions. The oil-filled pressure transducer is a special version recommended for measurements taken at measuring points subject to high dynamic loads such as shocks.
The pressure transducer can also be configured to carry out regulatory and controlling functions in process automation.
The devices can be equipped with electrical limit signal indicators for this purpose. All common diaphragm seal connections can be fitted.

_______________________________________________________________________________________________________

TCF050D Flush mounted pressure transmitter TCF Series

± ≤ 0,4% FS, output signal 4...20mA, 2-wire, TD4

Features

overload-proof design especially fpr use with small pipe widths such as KEG systems
output signal 4...20mA, TurnDown 4
accuracy ≤ ± 0,4%FS
standard process connections for industrial applications
simple patametering via 2-key concept and multiple-colour status LED
simple calibration, even without disconnection of the transmitter, through switchable power supply plant/calibrator supply
for pressure measurement with basic requierments
stainless-steel housings in the protection class IP 67 and IP 69K

Description

The TCF050D pressure transmitter is suitable for measuring pressure in applications with pulsing pressure and the danger of pressure shocks and cavitation e.g. in barrel filling systems. The piezoresistive measurement cells with ceramic membrane is designed for measurement ranges from 0…1 bar to 0…100bar. The flush-mounted process connections with G1/2“ / M22x1.5 are equipped with the TCF050D pressure transmitter with diaphragm seals and stainless steel membrane. These are ideal for flush-mounting in small pipe nominal widths. High-temperature versions for constant temperatures of up to 200°C are also available. The stainless steel field housing in IP 67 and IP 69K are resistant to all common cleaning procedures.
All TCF050D series pressure transmitter are equipped with a micro-processor controlled electronics system and an accuracy of ≤ ± 0.4% FS. They are parametrised with a simple and user-friendly operating concept via 2 keys and a multi-colour status LED. They are highly suited for applications with basic requirements of functionality and exactness.

_______________________________________________________________________________________________________

TCS Overload Safe flush mounted pressure transmitters Ceramic based

Output signal 4...20mA

Features

high overload safety for flush mounted applications with o-ring seal
measuring ranges from 0...2 bar to 0...400 bar for relative and absolute pressure in standard design
high-temperature safe up to 200ºc continuous load
shock- and vibration-resistant
different process connection adaptors

Description

The ceramic-sensor-based, flush-mounted pressure transmitters with metal membrane – Type TCS – for relative and absolute pressure with various sensor elements are available with manometer connection or flush-mounted membrane. This connecting concept allows highly overload-resistant pressure measurements and provides high operating safety for industrial process pressure and level measurements.

The devices are cast into stainless steel standard housings and are available according to protection types from IP 65 onwards. High-temperature versions for continuous operation at up to 200 ºC are available. Vacuum-resistance guaranteed. Installation into pipes with small nominal diameters is easily possible, due to the compact design. Appropriate welding sockets and process adaptors can be ordered.

The two process connection variants are G ½ or M22x1.5 with a threaded connection. In addition to the standard housing, a field housing design can be selected (see separate data sheet TCF...).

_______________________________________________________________________________________________________

TPS Pressure Transmitter smalline Output signal 4...20mA

Features

with internal and external measuring cell
optimal for broadband industrial applications for process printing
Measuring ranges from 0.35 bar to 30 bar, for relative and absolute pressure measurements
Use of food and pharmaceutical compliant materials
optional for high medium temperatures up to 200°C

DESCRIPTION

The flush-mounted TPS pressure transmitters' design makes them ideal for pressure and level measurements with minimal dead space, even in crystallizing or viscous media. The devices, housed in stainless steel housings, are available with IP 65 protection and can be optionally potted. Electrical connection is via a cable socket or, alternatively, an M12 connector. High-temperature versions for continuous operation up to 200 °C are available. Vacuum resistance is guaranteed. The compact standard housing is made of stainless steel. Appropriate weld-in sleeves and application-specific process connections are available.

In addition to flush-mounted versions for sanitary and general industrial applications, versions with pressure gauge connection and attached pressure seals are also available.

The TPS series devices are suitable for many industrial applications due to their wide range of connection options.

_______________________________________________________________________________________________________

VRM050D Flush mounted pressure transmitter overload safe, ± ≤ 0,2% FS, output signal 4...20mA, 2-wire, TD4

Features

special construction of the measuring cell an process connection for systems with pressure shocks and vibration e.g. separators, ...
EHEDG-aseptic certified modular process connection system PZM
accuracy ≤ ± 0,2%FS
simple calibration, even without disconnection of the transmitter, through switchable power supply plant/calibrator supply
output signal 4...20mA, TurnDown 4
simple patametering via 2-key concept and multiple-colour status LED
capacitive measuring cell, vacuum and overload safe, stainless steel membrane
easy to clean and high protection class IP 67 and IP 69K

Description

The VRM050D pressure transmitter is suitable for measuring the pressure and filling level in pipes. The highly overload safe capacitative measuring cells and the diaphragm seal makes the VRM050D ideal for use in applications with pressure shocks or cavitations such as in separators. Measuring ranges from -1/0…4bar to -1/0…70bar and special measuring ranges are available. The robust construction of the stainless steel field housing in IP 67 and IP 69K withstand aggressive and residue-free cleaning procedures such as those required in the food industry.
All 050D series pressure transmitter are equipped with a micro-processor controlled electronics system and an accuracy of ≤ ± 0.2% FS. They are parametrised with a simple and user-friendly operating concept via 2 keys and a multi-colour status LED. They are highly suited for applications with basic requirements of functionality and exactness.

As a process connection, the VRM050D comes equipped with a PZM modular system and is highly suited for applications placing the highest requirements of hygiene. The modular system PZM is certified according to EHEDG type EL-Aseptic Class I and is impermeable to micro-organisms.. The large range of process connection adapters such as the welded-in lugs for pipes, VARIVENT®, DRD flanges, DIN 11851 conical couplings, DIN 32676 clamps, etc. mean that the pressure transmitters can be used for a wide range of uses.

_______________________________________________________________________________________________________

Please call or email our technical experts to discuss your requirements who will be happy to help.

Tel 01704 505 333

email sales@igeltd.co.uk