top of page
hengesbach.jpg

​

​​

PIEZOSWITCH PS

Flush mounted pressure transmitter and switch PiezoSwitch PS

​

Features

  • Signaloutput 4...20mA, 2-L

  • UP to 2 PNP-Switchoutputs, 24V DC, max. 50mA, with indication

  • LED-Display to show actual measured value

  • simple operation with 3 buttons only: menu supported configuration of measuring range and switchpoints directly on the unit

  • Measuring ranges from -1/0...30bar, free programmable, with TurnDown 4

  • Process connection: G1" with sealing conus, with unionnut, without elastomers, adjustable. Alternativly EHEDG EL-ASEPTIC certified modular system type PZM with more than 8 different process adapters and welding sockets

Description

The pressure transmitter PiezoSwitch is well suited for measuring absolut and relativ pressure of fluids and gases in pipelines with temperature ranges from -40°C bis 125°C. Two available switch outputs enable the switching functions.

The flush-mounted processconnection PZM-type with o-ring-sealing and stainless steel diaphragm is certified EHEDG Type EL-ASEPTIC CLASS 1. It is ideal for measurements with highest hygienic demands and prescriptions. The PZM-Type connection comes with a wide range of adapters and reduces sustainably the cost of operation.
For applications without any elastomer-gaskets the metallicaly sealing and adjustable version K3 can be used.
The housing of the PiezoSwitch is complete of hygienic design. The pressure transmitter is resistant against overload of pressure and temperature and against CIP- and SIP applications.
The sensor measuring range of the piezoresistive and vacuum-tight sensor with stainless steel diaphragm is from -1/0…1bar up to -1/0…30bar.

​

​

_______________________________________________________________________________________________________

​

PIEZOMESS PZM050D

Flush mounted pressure and level transmitter modular system PZM series 050D

​

Features

  • EHEDG-Aseptic certified modular process connection system

  • accuracy ≤ ± 0,2%FS

  • simple parametering via 2-key concept and multi-colour status-LED

  • vacuum- und overload safe

  • easy to clean and high protection classes IP 67 und IP 69K

  • for measurement of pressure and filling level in tanks and pipes with basci requierments

  • simple calibration, even without disconnection of the transmitter, through switchable power supply plant / calibrator supply

Description

The PZM050D pressure transmitter is suitable for measuring the pressure and filling level, fulfilling the basic requirements of exactness. The robust stainless steel field housing in the hygienic design and the checked protection classes IP 67 and IP 69K withstand all aggressive and residue-free cleaning procedures such as those required in the food industry.
The 050D series pressure transmitter are equipped with a micro-processor controlled electronics system and an accuracy of ≤ ± 0.2% FS. They are parametrised with a simple and user-friendly operating concept via 2 keys and a multi-colour status LED. A TurnDown of up to 4 can be set using the full and empty adjustment.

The modular process connection system PZM acts as the process connection and gives its name to the pressure transmitter. This enables universal connection to almost any process connection from DN40 using only a single pressure transmitter and a suitable process connection adapter. The PZM pressure transmitters make a considerable contribution to achieving sustainable process chains. The process connection adapters available: Welded-in lugs for pipes and tanks, threaded and DIN 11851, conical couplings , VARIVENT® DIN 11864-1 female unions, DIN32676 clamps, etc. The PZM modular process connection is certified according to EHEDG type EL-Aseptic class I and has thus been successfully tested for use in applications with the highest require- ments made of hygiene. The design with press screws and O-ring seals enables alignment of the transmitter with simultaneous micro-organism impermeability.
The PZM050D pressure transmitters are highly-suited to use in applications with strict standards of hygiene and basic require- ments of functionality and accuracy.

_______________________________________________________________________________________________________

​

PIEZOMESS PZM100 / PZM101

Flush mounted pressure and level transmitter, type PIEZOMESS PZM100/PZM101/VARIMESSS VRM100/101

Features

  • EHEDG-aseptic certified modular process connection system

  • precise measurements ≤ ± 0,15% FS

  • TurnDown 10

  • integrated or external display and operating module OPUSM

  • vacuum proof and extremly overload safe

  • direct entry of parameters with plain text display

  • easy to clean and high protection classes IP 67 and IP69K

  • application strengths: content and process pressure measurements / vacuum measurements even at high temperatures

Description

The PIEZOMESS PZM100 und PZM101 and VARIMESS VRM100 und VRM101 pressure transmitters are suitable for taking pressure and filling level measurements in pipelines and containers. The modular process connection system offers a wide range of connection adapters and helps to cut costs in the long term. The flush-mounted process connection with O-ring seal and stainless steel membrane is certified to EHEDG type EL-ASEPTIC CLASS 1 and is thus predestined for measurements which satisfy even the most stringent hygiene requirements.

The sensor measuring ranges of the piezoresistive vacuum-proof measuring cell with stainless steel membrane of the PZM pressure transmitters range from -1/0…0.35bar to -1/0…100bar. The VRM pressure transmitters feature a capacitive measuring cell with ceramic membrane and are designed to measure from -1/0…+4bar to -1/0…+70bar or 0…4bar to 0…70bar Given their high overload protection, they are ideal for taking measurements under conditions where pressure shocks and cavitation are possible. Special measuring ranges are possible for both versions.

All the pressure transmitters in series 100/101 are designed for universal applications and, in particular, for applications with constantly high temperatures of up to 200°C. Furthermore, using the on-site display with series 100 and the display and operating module OPUSM in series 101, the pressure transmitters can be simply read out, configured and diagnosed.

_______________________________________________________________________________________________________

​

PIEZOMESS PZM200 / PZM201 / PZM200H / PZM201H

Flush mounted pressure and level transmitter PZZM/VRM modular system series 200

​

Features

  • high precision ≤ ± 0,05% FS, turn down 10, vacuum safe

  • further scope of functions thanks to programmability

  • optional with HART® protocol

  • tank linearisation for standard tank shapes and special designs thanks to volumetric measurement with OPUSi

  • diagnosis function for monitoring of devices

  • copying of device parameters with easy transfer

  • integrated on-site display or external OPUSi display and operating module for parametrisation and display of measuring values

  • application strenght: highly precise measurement of content pressurised tanks / vacuum measurements with high temperatures

  • EHEDG-aseptic certified modular process connection system

The digital pressure and level transmitters PIEZOMESS PZM / VARIMESS VRM - Series 100, with their O-ring seals, are suitable for pressure and level measurements without dead spaces, under strict cleanliness conditions, as well as for viscous and crystallising media. They have a modular, flush-mounted connection concept with various adaptors. An additional temperature sensor as a secondary measuring element provides the temperature measured on the sensor available on the display as additional information.  

 

The PIEZOMESS PZM / VARIMESS VRM - Series 100 consists of one basic device, which can be combined with various application-specific adaptors, e.g. welding sockets, DRD, VARIVENT, DIN 11851, Clamp, Flange DIN, etc. In combination with the advantages of digital electronics, e.g. a large measuring range and on-site adjustability, this concept results in clearly reduced storage space and spare parts and thus to a cost reduction in materials administration. During operation, various pressure units can be shown on the local display (OPUS), along with the sensor temperature as a secondary process indicator. The display and operating module has either been integrated into the field housing or is available as an external housing with a plug connection. The sensor-specific data are stored in a reference data memory and are made available to the microprocessor for evaluation purposes. 

The pressure sensors of the PIEZOMESS PZM series work according to the piezo-resistive measuring principle and are separated from the measuring material by a stainless steel membrane.     The pressure is transmitted via an oil filling that is safe for use with food. All parts that come into contact with the medium have been welded. The PIEZOMESS PZM type series has been specially designed for level measurements.

 

The pressure sensors of the VARIMESS VRM series are robust and overload-protected ceramic membranes that work according to the capacitive method. The pressure to be measured acts on the sensor via the flush-mounted stainless steel membrane and the low-volume oil supply to the sensor. The system has a high overload capacity due to its special design. The type series VARIMESS VRM is intended for pressure measurements, where pressure surges and cavitations are common.

_______________________________________________________________________________________________________

​

PIEZOTEC PZT050D

Flush mounted pressure and level transmitter modular system PZT050D

​

Features

  • simple parametering via 2-key concept and multi-colour status-LED

  • accuracy ≤ ± 0,2%FS

  • modular process connection system with elastomic free sealing cone

  • output signal 4...20mA, TURNDOWN 4

  • measuring ranges from -1/0...0,35bar up to -1/0...100bar

  • easy to clean and high protection classes IP 67 und IP 69K

  • simple calibration, even without disconnection of the transmitter, through switchable power supply plant / calibrator supply

  • for measurement of pressure and filling level in tanks and pipes with basic requierments

Description

The PZT050D pressure transmitters are characterised by their modular process connection system and are suitable for measuring pressure and filling level in hygiene applications. The flush-mounted measuring cell with stainless steel membrane enables measur­ing ranges of -1/0…0.35bar to -1/0…100bar. The robust construction of the stainless steel field housing containing the protection classes IP 67 and IP 69K, makes the PZT050D pressure transmitter suitable for all common exterior cleaning procedures.
The 050D series pressure transmitters are equipped with a micro-processor controlled electronics system and an accuracy of
≤ ± 0.2% FS. They are parametrised with a simple and user-friendly operating concept via 2 keys and a multi-colour status LED. A TurnDown of up to 4 can be set using the full and empty adjustment.

The process connection is characterised by the elastomer-free sealing cone, providing a metallic seal.
A wide range of hygienic process connections are available as process connection adapters. This includes the female unions DIN 11864-1, VARIVENT®, DRD, DIN 32676 clamp etc.. The modular process connection system of the PZT050D pressure transmitter makes an active contribution to cost-reduction.

_______________________________________________________________________________________________________

​

PIEZOTEC PZT100 / PZT101

Pressure and level transmitter type PIEZOTEC PZT100/PZT101

​

Features

  • modular process connection system with sealing cone free of elastomers

  • precise measurements ≤ ± 0,15% FS

  • TurnDown 10

  • integrated onsite display or external operating module OPUSM for parametrisation and display of measured values

  • high protection classes IP 67 and IP69K

  • vacuum tight measureing cell

  • application strengths: content and process pressure measurements / vacuum measurements even at high temperatures

Description

The pressure transmitters PZT are applicable for pressure and level measurements in pipes and vessels. The modular process connection system offers a huge variety of connection adapters and adds a sustainable cost reduction. The flush mounted process connection with its sealing cone free of elastomers and its stainless steel membrane is certified by EHEDG, type EL-CLASS I and hence applicable for measurements with highest hygienic requirements.

The vacuum tight measuring cell with stainless steel membrane works with the piezoresistive measruning principle. The pressure transmitters PZT are designed for measuring ranges of -1/0...0,35bar up to -1/0...100bar. Special measuring ranges are also available. Due to the construction for permanent temperatures up to 125°C or 200°C respectively the transmitter are CIP and SIP cleanable. In addition the high protection classes IP67 and IP69K allow an accurate outside cleaning with foam and power washer and prevent the permeation of humidity into the instrument. As an additional protection against humidity the electronics in the housing are completely casted.

All the pressure transmitters in series 100/101 are designed for universal applications and, in particular, for applications with constantly high temperatures of up to 200°C. Furthermore, using the on-site display with series 100 and the display and operating module OPUSM in series 101, the pressure transmitters can be simply read out, configured and diagnosed.

_______________________________________________________________________________________________________

 

PIEZOTEC PZT200 / PZT201 / PZT200H / PTZ201H

Superior precision pressure and level transmitter - Type PIEZOTEC PZT200/PZT201

​

Features

  • High-precision measurements of pressure and level with an accuracy of ≤ ± 0.05% FS

  • modular process connection system PZT

  • especially for applications with high hygiene requirements

  • easy-to-clean stainless steel field housing with protection classes IP67 and IP69K

  • PZT200 with integrated on-site display and operating module

  • PZT2011 with external display and control module OPUS i

  • as series 200H / 201H also configurable with HART ® protocol

  • Wide range of different process connection adapters in nominal diameters from DN40

  • Measuring ranges from -1/0bar to 100bar and turn-down 10:1

  • Easy copying of device settings using the Easy-Transfer function

Description

The PZT200 and PZT201 pressure transmitters are suitable for pressure and level measurements in pipelines and vessels. The modular process connection system offers a wide range of connection adapters and contributes to sustainable cost reduction.

The vacuum-tight measuring cell with a stainless steel diaphragm operates according to the piezoresistive measuring principle. The PZT pressure transmitters are designed for measuring ranges from -1/0…0.35 to -1/0…100 bar. Special measuring ranges are also available. Designed for continuous medium temperatures up to 125°C or 200°C, the transmitters are CIP and SIP cleanable. The high protection ratings IP67 and IP69K also enable safe external cleaning with foam and high-pressure cleaners and reliably prevent moisture from penetrating the device. For additional protection against moisture, the electronics are fully encapsulated in the housing.

All pressure transmitters in the 200/201 series are designed for universal applications, especially for applications with continuously high temperatures up to 200°C. Furthermore, the pressure transmitters can be easily read, configured, and diagnosed using the on-site display for the 200 series and the OPUS i display and operating module for the 201 series .

Using the EASY TRANSFER function, the configuration data can be copied from the OPUS i to other Series 201 pressure transmitters. This simplifies commissioning for similar applications. The ability to program tank dimensions for standard tank designs as well as volumes determined for special tanks using the calibration method allows for direct display of exact fill levels and tank contents.

In addition to the features of the 200/201 Series, the 200H/201H Series pressure transmitters feature a built-in HART modem. This enables remote configuration and evaluation of the transmitters using the HART® protocol.

_______________________________________________________________________________________________________

​

TPF050D

Flush mounted pressure and level transmitters TPF series 050D

​

Features

  • Output signal 4...20mA, TurnDown 4

  • Accuracy ≤ ± 0.2%FS

  • Simple parameterization thanks to the 2-button concept and multi-colored status LED

  • with hygienic and standard process connections as fixed connection

  • vacuum and high overload resistant

  • easy to clean and high protection classes IP 67 and IP 69K

  • for pressure and level measurements in tanks and pipelines with basic requirements

  • Simple calibration, even without disconnecting the transmitter, thanks to switchable
    system/calibrator power supply

Description

The TPF050 D pressure transmitters are suitable for pressure and level measurements in pipelines and tanks, even with small nominal diameters. The flush-mounted measuring cell with a stainless steel diaphragm allows for measuring ranges from -1/0…0.35 bar to -1/0…100 bar, depending on the process connection. The robustly constructed stainless steel field housing, with tested protection classes IP 67 and IP 69K, can withstand even the most extreme external cleaning processes required in the food and pharmaceutical industries. The 050 D
series pressure transmitters feature microprocessor-controlled electronics and an accuracy of ≤ ± 0.2% FS. They are parameterized using a simple and user-friendly operating concept via two buttons and a multi-color status LED. A turndown of up to 4 can be set using the full or empty calibration. A wide range of both hygienic and non-hygienic process connections are available for the TPF050 D. Process connections include: ISO 228 G1" screw-in thread with elastomer-free sealing cone and clamping screw, conical or threaded connectors DIN 11851, VARIVENT ® with Ø 50mm or Ø 68mm, DRD. Customer-specific solutions can also be implemented.

_______________________________________________________________________________________________________

​

TPF100 / TPF101

Pressure and level transmitter - Type TPF100 / TPF101

​

Features

  • precise measurements of pressure and level with an accuracy of ≤ ± 0.15% FS

  • Piezoresistive measuring cell with flush stainless steel membrane

  • easy-to-clean stainless steel field housing with protection classes IP 67 and IP69K

  • TPF100 with integrated on-site display and operating module

  • TPF101 with external display and control module OPUS M

  • wide range of hygienic process connections for the food industry

  • Turndown 10:1

Description

The TPF pressure transmitters are suitable for pressure and level measurements in pipelines and vessels. The wide range of hygienic process connections enables use in all applications in the food and pharmaceutical industries. Customized process connections can also be added upon request. The vacuum-tight measuring cell with a stainless steel diaphragm operates according to the piezoresistive measuring principle. The TPF pressure transmitters are designed for measuring ranges from -1/0…0.35 to -1/0…100 bar. Special measuring ranges are also available. Designed for continuous medium temperatures up to 125°C or 200°C, the transmitters are CIP and SIP cleanable. The high protection ratings IP67 and IP69K also enable safe external cleaning with foam and high-pressure cleaners and reliably prevent moisture from penetrating the device. For additional protection against moisture, the electronics are fully encapsulated in the housing.

Display and control module OPUS M

All pressure transmitters in the 100/101 series are designed for universal applications, especially for applications with continuously high temperatures up to 200°C. Furthermore, the pressure transmitters can be easily read and configured via the on-site display for the 100 series and the OPUS M display and operating module for the 101 series.

_______________________________________________________________________________________________________

​

TPF200 / TPF201 / TPF200H / TPF201H

Superior precision pressure and level transmitter - Type TPF200 / TPF201

​

Features

  • for precise measurements with an accuracy of ≤ ± 0.05% FS

  • Wide range of hygienic process connections
    VARIVENT ® , DRD flange, clamp DIN32676, collar socket DIN11864-1, conical socket DIN11851, ...

  • as Series 200/201 also with HART ® protocol

  • "High-Safe" stainless steel field housings with protection classes IP67 and IP69K

  • TPF200 with integrated on-site display and operating module

  • TPF201 with external display and control module OPUS i

  • Tank linearization for standard tanks as well as for special designs by gauging

  • Measuring ranges from -1/0bar to 100bar and turn-down 10:1

  • Easy copying of device settings using the Easy-Transfer function

Description

The TPF200 and TPF201 pressure transmitters are suitable for pressure and level measurements in pipelines and vessels. The wide range of hygienic process connections allows for use in all applications in the food and pharmaceutical industries. Customized process connections can also be added upon request.

The vacuum-tight measuring cell with a stainless steel diaphragm operates according to the piezoresistive measuring principle. The TPF pressure transmitters are designed for measuring ranges from -1/0…0.35 to -1/0…100 bar. Special measuring ranges are also available. Designed for continuous medium temperatures up to 125°C or 200°C, the transmitters are CIP and SIP cleanable. The high protection ratings IP67 and IP69K also allow for safe external cleaning with foam and high-pressure cleaners and reliably prevent moisture from penetrating the device. For additional protection against moisture, the electronics are fully encapsulated in the housing.

All pressure transmitters in the 200/201 series are designed for universal applications, especially for applications with continuously high temperatures up to 200°C. Furthermore, the pressure transmitters can be easily read, configured, and diagnosed using the on-site display for the 200 series and the OPUS i display and operating module for the 201 series .

Using the EASY TRANSFER function, the configuration data can be copied from the OPUS i to other Series 201 pressure transmitters. This simplifies commissioning for similar applications. The ability to program tank dimensions for standard tank designs as well as volumes determined for special tanks using the calibration method allows for direct display of exact fill levels and tank contents.

In addition to the features of the 200/201 Series, the 200H/201H Series pressure transmitters feature a built-in HART modem. This enables remote configuration and evaluation of the transmitters using the HART® protocol.

_______________________________________________________________________________________________________

​

​KERAMESS KS050D​

Front flush pressure and level transmitters KERAMESS KS series 050D

​

Features

  • mechanically robust, dry ceramic measuring cell, suitable for viscous and abrasive media

  • Output signal 4...20mA, TurnDown 4

  • Accuracy ≤ ± 0.2%FS

  • Simple calibration, even without disconnecting the transmitter, thanks to switchable
    system/calibrator power supply

  • Simple parameterization thanks to the 2-button concept and multi-colored status LED

  • with hygienic and standard process connections as fixed connection

  • for pressure and level measurements in tanks and pipelines with basic requirements

Description

The KS050 D pressure transmitters are suitable for pressure and level measurements in tanks and pipelines. The capacitive measuring cell with ceramic diaphragm makes the KS050 D ideal for use in applications with abrasive media. The pressure transmitters of the KERAMESS series are designed for measuring ranges from -1/0…1 bar to -1/0…70 bar. Special measuring ranges are also available. The 050 D
series pressure transmitters feature microprocessor-controlled electronics and an accuracy of ≤ ± 0.2% FS. They are parameterized using a simple and user-friendly operating concept via two buttons and a multi-color status LED. A turndown of up to 4 can be set using the full or empty calibration.

The wide range of hygienic process connections, such as VARIVENT® , clamp DIN 32676, conical socket with grooved union nut DIN 11851, etc., ensures versatile application possibilities for the KS050 D in the food industry and all other hygienic applications. A wide variety of process connections is also available for non-hygienic applications. Use in hygienic applications is supported by the robust stainless steel field housing with IP 67 and IP 69K protection, which reliably withstands even extreme external cleaning processes. The KS050 D pressure transmitters are therefore ideally equipped for use in applications with high hygiene requirements and basic requirements for functionality and accuracy.

_______________________________________________________________________________________________________

​

KERAMESS KS100 / KS101

Pressure and level transmitter - Type KERAMESS KS100 / KS101

​

Features

  • precise measurements of pressure and level with an accuracy of ≤ ± 0.15% FS

  • with dry ceramic measuring cell

  • TurnDown 10

  • easy to clean and high protection classes IP 67 and IP69K

  • Integrated on-site display or external display and operating module OPUS M for parameterization and measured value display

  • Application strengths: Measurement of content and process pressure in small measuring ranges with overload-resistant ceramic measuring cell, also for abrasive media

  • direct input of parameters with plain text display

Description

The KERAMESS KS100 and KS101 pressure transmitters are suitable for pressure and level measurements in pipelines and vessels. The wide range of process connections allows for use in all applications in the food, pharmaceutical, and pulp industries. Customized process connections can also be added upon request.

Display and control module OPUS M

The vacuum-tight and highly overload-proof measuring cell with a ceramic diaphragm made of high-purity aluminum oxide operates according to the capacitive measuring principle. KERAMESS pressure transmitters are designed for measuring ranges from -1/0…1 to -1/0…70 bar. Measuring ranges from 0…0.05 bar and -0.1…+0.1 bar are available, as are other special measuring ranges. The ceramic diaphragm makes KERAMESS pressure transmitters particularly suitable for aggressive and abrasive media. Their design for continuous medium temperatures up to 125°C enables CIP and SIP cleaning of the transmitters. The high protection ratings IP67 and IP69K also ensure safe external cleaning with foam and high-pressure cleaners and reliably prevent moisture from penetrating the device. For additional protection against moisture, the electronics are fully encapsulated in the housing.

All pressure transmitters in the 100/101 series are designed for universal applications, especially for applications with continuously high temperatures up to 200°C. Furthermore, the pressure transmitters can be easily read and configured via the on-site display for the 100 series and the OPUS M display and operating module for the 101 series.

_______________________________________________________________________________________________________

​

KERAMESS KS200 / KS201 / KS200H / KS201H

Superior precision pressure and level tranmitter - Type KERAMESS KS200 / KS201

​

Features

  • for precise measurements with an accuracy of ≤ ± 0.05% FS

  • as series 200H/201H also with HART ® protocol

  • capacitive measuring cell with ceramic membrane

  • Measuring ranges from -1/0bar to 70bar and turn-down 10:1

  • "High-Safe" stainless steel field housings with protection classes IP67 and IP69K

  • KS200 with integrated on-site display and operating module

  • KS201 with external display and operating module OPUS i

  • Wide range of hygienic process connections
    VARIVENT ® , clamp DIN32676, conical socket DIN11851, DRD flange, flange EN 1092-1 ...

  • Tank linearization for standard tanks as well as for special designs by gauging

  • Easy copying of device settings using the Easy-Transfer function

Description

The KERAMESS KS200 and KS201 pressure transmitters are suitable for pressure and level measurements in pipelines and vessels. The wide range of process connections allows for use in all applications in the food, pharmaceutical, and pulp industries. Customized process connections can also be installed upon request.

The vacuum-tight and highly overload-proof measuring cell with a ceramic diaphragm made of high-purity aluminum oxide operates according to the capacitive measuring principle. KERAMESS pressure transmitters are designed for measuring ranges from -1/0…1 to -1/0…70 bar. Measuring ranges from 0…0.05 bar and -0.1…+0.1 bar are available, as are other special measuring ranges. The ceramic diaphragm makes KERAMESS pressure transmitters particularly suitable for aggressive and abrasive media. Their design for continuous medium temperatures up to 125°C enables CIP and SIP cleaning of the transmitters. The high protection ratings IP67 and IP69K also ensure safe external cleaning with foam and high-pressure cleaners and reliably prevent moisture from penetrating the device. For additional protection against moisture, the electronics are fully encapsulated in the housing.

All pressure transmitters in the 200/201 series are designed for universal applications, especially for applications with continuously high temperatures up to 200°C. Furthermore, the pressure transmitters can be easily read, configured, and diagnosed using the on-site display for the 200 series and the OPUS i display and operating module for the 201 series .

Using the EASY TRANSFER function, the configuration data can be copied from the OPUS i to other Series 201 pressure transmitters. This simplifies commissioning for similar applications. The ability to program tank dimensions for standard tank designs as well as volumes determined for special tanks using the calibration method allows for direct display of exact fill levels and tank contents.

In addition to the features of the 200/201 Series, the 200H/201H Series pressure transmitters feature a built-in HART modem. This enables remote configuration and evaluation of the transmitters using the HART® protocol.

_______________________________________________________________________________________________________

​

​​​​​

Please call or email our technical experts to discuss your requirements who will be happy to help.

  ​

                                                                        Tel 01704 505 333

                                                                     email sales@igeltd.co.uk

Piezo switch PS.png
PIEZOTEC PZT050D.png
PIEZOMESS PZM100.png
PIEZOMESS PZM200 PZM201 PZM200H PZM201H.png
PIEZOTEC PZT050D.png
PIEZOTEC PZT100  PZT101.png
PIEZOTEC PZT200 PZT201 PZT200H PZT201H.png
TPF050D.png
TPF100  TPF101.png
TPF200  TPF201  TPF200H  TPF201H.png
KERAMESS KS200  KS201  KS200H  KS201H.png
KERAMESS KS050D.png
KERAMESS KS100  KS101.png
bottom of page